Showing Archived File

Variable Speed Drive Compressor GA7-110VSD+ (7-110kW/10-15HP)

We are very happy to announce that Atlas Copco’s GA7-110VSD+ Oil-injected rotary screw compressor has been awarded with the MyHIJAU Mark. We are the first Compressor Manufacturer given this green certification since 27 October 2016.

With MyHIJAU certification, our compressor become a green technology product. Equipment or system used to conserve the natural environment and resources which minimizes and reduces the negative impact on human activities, and it was approved by the Minister of Finance (MOF).

GA VSD+ technology closely matches the air demand by automatically adjusting the motor speed. Atlas Copco’s Variable Speed Drive combined with the innovative vertical design of the iPM (Permanent Magnet) motor and brings a game changing in the compressor industry.

This results in average of 50% energy savings, even in the harshest operational conditions and an average cut of 37% in the lifecycle cost of a compressor. VSD+ works with permanent, in-house designed permanent magnet motors.

Why Atlas Copco Variable Speed Drive+ technology?

• On average 50% energy savings with an extensive flow range (20-100%).
• Integrated Elektronikon® Graphic controller controls the motor speed and high efficiency frequency inverter.
• No wasted idling times or blow-off losses during operation.
• Compressor can start/stop under full system pressure without the need to unload with special VSD+ motor.
• Eliminates peak current penalty during start-up.
• Minimizes system leakage due to a lower system pressure.

Showing Archived File

PROJECT BY CONCORD GROUP

Background of the project

Lepar Hilir Biogas Power Plant located at FGV’s Lepar Hilir Palm Oil Mill in Pahang, is a Waste-to-Wealth project, conceptualized by Concord under the Build-Own-Operate (BOO) model.  This plant treats palm oil mill effluent (POME), captures its biogas for power generation and sells 1.5MW electricity to Tenaga Nasional Berhad (TNB), which is governed by the Renewable Energy Power Purchase Agreement (RePPA) under the Feed-in-Tariff (FiT) Scheme, quota issued by Sustainable Energy Development authority (SEDA) Malaysia (SEDA).

Palm oil mills produce effluent which is considered as waste and pollutes the environment. It also releases biogas which contains methane, a greenhouse gas 21 times more potent than carbon dioxide.  The captured methane is used as fuel to generate electricity that is then sold to TNB under the FiT mechanism at a fixed rate.

Concord Group sees the potential of transforming and valorizing the POME into wealth by constructing the FGV Lepar Hilir Biogas plant in Pahang, Malaysia.

This plant is financed, owned, constructed and operated by Concord under the BOO business model and was commissioned in December 2018.   This project addresses greenhouse gas emission issues in the palm oil industry and valorizes it into a form of renewable energy.  The development of the biogas power plant initiated a value chain of activity within the local communities which has a direct impact on three Ps (People, Planet and Profits).  It promotes sustainable practices by performing a truly circular economy business model.

Project execution of this project has also set a new benchmark for this industry.  It was successfully commissioned within 14 months followed by another 3 similar plants within a period of 6 months.  It meets the expectations of all related project stakeholders i.e. shareholders, mill owners, financial institutions, authorities, vendors, state and federal governments.

Contribution of this project to the Industry, Country (Malaysia), ASEAN, World

Concord Group also gives back to the industry and community through Corporate Social Responsibility (CSR) initiatives such as experience-sharing programs on safety and health in biogas plants and providing internship placement opportunities for students.

A higher awareness of the benefits to use biogas as renewable energy has been embedded among the palm oil mill owners, which will bring us to achieve the collective aspiration target of 23% primary energy mix by 2035 within the ASEAN countries, being a region of palm oil producing countries.

This plant will also help Malaysia to achieve its RE target of energy generation mix to 20% by 2025.

In long run, the world will change their perception towards palm oil industry with these sustainable practices.

We capture biogas to reduce the climate change effect of the palm oil industry and simultaneously generate green energy to reduce the dependency on fossil fuel as the world moves towards renewable energy and diversification of energy sources. 

Overall, the success of this initiative has proven that renewable energy can provide a great business model, while contributing to sustainability in this industry.

Showing Archived File

About MIE Industrial Sdn. Bhd.

MIE Industrial Sdn Bhd, with its headquarter in Puchong, is a full-fledged local EPCC solution provider in Malaysia. Established in 1997, MIE industrial started off as an Electrical and Instrumentation contractor from a humble two-story shop lot office.

In 2015, MIE Industrial marks a major milestone by having CTCI on board as their strategic partner. CTCI is a Taiwan-based EPC company with offices worldwide and known over for their engineering and construction expertise. With CTCI expansive engineering and working experience, MIE Industrial grew its engineering force to now 90-plus engineers from various discipline and backgrounds, all stationed  in-house in its Headquarter. From process, mechanical, piping and solar, MIE Industrial full range of engineering discipline are ready to tackle any engineering request no matter the complexity.

In 2019, MIE Industrial hit another milestone by acquiring Seremban Engineering Berhad, making Seremban Engineering as one of MIE Industrial’s subsidiary. With Seremban Engineering expertise, MIE Industrial has now access to fabrication business, particularly in pressure vessels and storage tanks.

MIE Industrial is also the first EPCC Company to be appointed as KITZ Valve official distributorship for the oil and gas market in Malaysia.  Known world over for its quality, MIE Industrial is now offering to its clients a full range of valve solution such as ball valve, gate valve, actuated on/off valve and globe valve among others.

MIE Industrial is wholly committed to provide clients with a quality and efficient EPCC solution. Always striving for excellence, MIE Industrial is committed to deliver above and beyond clients’ expectation.

Showing Archived File

SUSTAINABLE PRINTING, ROOTED IN GERMAN QUALITY STANDARDS

Over 375 million empty toner and ink cartridges are thrown away as scrap every
year – this equates to roughly 11 cartridges every second!

The plastics used in printer cartridges are made from engineering grade polymer which has a very slow decomposition rate ranging between 450 and 1000 years depending on the cartridge type.

Generally, cheap new build compatible cartridges end up going straight to landfill at their end of life due to poor low grade plastics and components that are not of high enough quality standard to
reuse.

freecolor printer cartridges are remanufactured, meaning they are reused. Reuse is the highest form of environmental responsibility. It is superior to recycling in that it doesn’t use non-renewable resources to break down plastic and metal.

Using freecolor remanufactured cartridges will dramatically reduce your carbon footprint by preventing tonnes of toxic material going into landfill.

SUSTAINABLE QUALITY

For more than 20 years now, the freecolor brand has been one of the most successful and bestselling brands in the DACH region (Germany, Austria, Switzerland) – a market where product quality, reliability and sustainability are paramount. In recent years the brand has expanded successfully to international markets.

The freecolor product range has benefited from years and millions of dollars in the development of the most sophisticated manufacturing environment in the document imaging industry. Our in-house R&D and engineering teams ensure that our products meet or exceed OEM performance for yield and print quality through the design and implementation of propriety product development practices, manufacturing standards, process automation, and performance testing protocols.

In state-of-the-art ISO 9001 and ISO 14001 certified production facilities, empty high-quality OEM cores are given a second life when they go a thorough remanufacturing and testing process to become freecolor toner cartridges. Freecolor offers the broadest and deepest product selection, including cartridges that are compatible with all the leading brands. ISO 19752 (monochrome cartridges) and ISO 19798 (colour cartridges) testing standards for page yield, 100% post-production testing and quality toner powder result in a reliable product, only matched by the OEM.

The entire freecolor range represents a true alternative to the OEM, as it combines OEM performance with environmental sustainability and significant savings over the original cartridge.

CERTIFIED SUSTAINABILITY

Quality and sustainability are amongst the key features of our product.

Over the years, freecolor branded cartridges have acquired a
number of certifications to verify our commitment to both:

SUSTAINABLE LOGISTICS AND PACKAGING

Freecolor packaging uses sustainable materials. Long before the plastic pollution problem made international headlines, the majority of our inserts had been switched from plastic airbags to recyclable cardboard inserts.

Our boxes are also made from recyclable cardboard – and they are tailored to best product fit. This allows for more efficient use of cubic capacity, which results in fewer shipments overall thereby significantly reducing CO2 emissions and fossil fuel consumption – leading to an overall reduction in carbon footprint.

OVERVIEW FREECOLOR ADVANTAGES

 Environmentally Sustainable products: remanufacturing = reuse
 OEM-like performance and quality, but with significant cost savings
o ISO 19752 (mono) and ISO 19798 (colour) testing standards for page yield
o ISO 9001 and ISO 14001 certified production facilities
o 100% post-production testing
 Several environmental certifications and compliances
 Sustainable packaging and supply chain
 Comprehensive 3 year warranty
 100% IP-safe products

SUSTAINABLE PRINTING – WITH FREECOLOR TONER CARTRIDGES

Showing Archived File

SCR SCREW AIR COMPRESSOR PERMANENT MAGNETIC SERIES

IP65 MOTOR INVERTER CONTROL

MODEL: SCR50PM-8 (50HP) RANGE: 30 – 150 HP

POWER SAVINGS: 35%-40%                

Services We Offer:

• JKKP Appointed Contractor for NDT Thickness Test
• Chemical Cleaning & Maintenance Air Tank
• Anti-Rust Spray Paint Maintenance
• JKKP PMT Application & Renewal Service
• After Sales & Services of Air Compressor/ Air Dryer/ Air Filter

CONTACT US NOW

Website: www.scrcompressor.com.my

Email: simontanscr@gmail.com

Tel: 03-5634 8966

H/P: 019-3348766 (Simon Tan)

Penang H/P: 012-4700995 (Alex Goh)

Showing Archived File

Greetings from GreenTech Malaysia and MyHIJAU Team!

CANCELLATION OF MyHIJAU MARK BUSINESS CLINIC YEAR 2020 SESSION #3

On Monday 16 March 2020, Prime Minister Tan Sri Muhyiddin Yassin has declared that the entire country will be on a movement control order starting from March 18 to March 31 to deal with the rise in Covid-19 cases.

With that regards we are regret to inform that MyHIJAU MARK BUSINESS CLINIC YEAR 2020 SESSION #3 which scheduled on this coming 25/3/2020 is now being cancelled. We will later notify the new date for session. The cancellation also due to the very less confirmation participation from the companies.

However, we from MyHIJAU Team still can be accessed thru email. If you have any inquiries, we will be glad to help you.

If you have any enquiry, please feel free to contact us:

1. Mr. Syamiullah email: syamiullah@greentechmalaysia.my        
2. Pn. Nur Syahira: syahira@greentechmalaysia.my

Once again we would like to apologies and we really appreciate your interest to joint this session and to register under MyHIJAU Mark.